How Old Tires Are Turned Into Electricity thumbnail by

How Old Tires Are Turned Into Electricity

How Old Tires Are Turned Into Electricity


Listen This Article

The benefits of using old tires to power a generator are great. It is a cheap and sustainable way to generate electricity that will not hurt the environment. Tires have been used in this manner for decades, but the process has gotten more efficient over time. The process is simple; all you need is an electric engine or turbine connected to the tire and some diesel fuel, which burns up as it turns the wheel. Old tires can be found at any junkyard or recycling center for free! So why not use them?

There are a few reasons why this process is not more popular. The first reason is that it can be challenging to find a use for the generated electricity. The second reason is that the generators can be loud and smelly. However, both of these problems are being solved with new technology. There are now ways to store the generated energy and practices to make the generators more efficient.

Transforming Waste Tires Into Energies

Before we get into the details of all this, it might be helpful to understand how old tires are turned into electricity. The process can vary depending on what kind of machine you use. Some generators call for thousands of pounds of steel rods to be forced into an electric engine, while others require a small number of rubber pellets that are compressed. In some cases, the tires are shredded and then burnt.

Regardless of how it is done, a generator must turn old rubber into electricity. This can be done in several ways:

Burning the Tires

One way is to burn up old or discarded tires through combustion. This technology has been used for decades for a variety of purposes. The tires are stuffed into a large container and then burned until they turn to ashes. However, the byproduct produces smoke and smelly air that may pose respiratory health risks for people in the area.

Shredding Tires

Some machines shred car and truck tires into small pieces. The pieces are then heated until they turn into a black slag. This slag can be used for various purposes, such as filling potholes and making asphalt.

Turning Tires Into Rubber Chips

Another way to use old tires is to chop them up into small rubber chips. These chips can then be melted down and used to make new tires, among other things.

Turning Tires Into Electricity

The most popular way to use old tires is to turn them into electricity. This can be done in various ways, as we mentioned earlier.

The Process of Converting OLD Tires Into Electricity

Now that you have a general idea of how old tires are turned into electricity, it might be helpful to learn about the details. According to a company from Wisconsin called Ener-T, generating power from old tires is very simple. They burn up rubber by stuffing it into an electric engine and then burning diesel fuel as well. In other words, you need two things: a fire and a spinning machine. The tires are burned slowly through combustion. When the rubber turns to ashes, it gives off energy that can power a generator or an entire machine shop.

Cheapest Source of Energy

One reason old tires should be used for electricity is that they are the cheapest energy source. According to researchers from the University of Massachusetts, an average tire can produce up to 12,000 BTUs of heat energy. This is enough to create steam and power a steam engine. In other words, tires hold a lot of potential as a cheap energy source for industry and transportation.


Tires are also considered a renewable source of energy. This is because they can be recycled over and over again. As you probably know, tires are made from synthetic materials that will not rot when left outside in the sun. According to researchers at Old Tyre Power, using old tires for electricity makes it possible to generate 55-kilowatt hours of power per pound of material. This means that a single-car tire can generate enough electricity to power an average home for about five days.

Environmentally Friendly

Renewable energy is good for the environment because it does not produce greenhouse gases or other pollutants. As mentioned earlier, some companies burn old tires to create electricity. However, some companies use rubber chips to produce energy. In either case, the end product is clean and does not harm our planet in any way.

Inconvenience of Disposing

One final benefit of recycling tires as an energy source is that it helps reduce landfills. You see, the biggest problem with recycling tires is that most people do not know how to do it. They throw them away in a landfill, where they will take up space and eventually decompose. By recycling tires as energy, we can put them to good use and reduce the amount of trash we produce each year.

  • 1. Cheap energy source – old tires can be burned to create steam that can power a generator.
  • 2. Renewable source of energy – old tires can be recycled over and over again
  • 3. Environmentally friendly – old tires do not produce greenhouse gases or other pollutants.
  • 4. Inconvenience of disposing of – old tires take up space and decompose in landfills.
  • 1. Safety – people should consider safety precautions before burning or recycling old tires as an energy source.
  • 2. Availability – not all companies will have access to old tires, limiting their ability to recycle them as an energy source.
  • 3. Usefulness – some people might consider using old tires as a source of energy to waste time and resources.
  • 4. Transportation – transporting old tires can be difficult and costly.


Old tires are an often overlooked source of renewable energy. By turning them into electricity, we can reduce landfills, save space, and ensure that they are put to good use. Although safety should be considered before burning or recycling old tires as a source of energy, the pros outweigh the cons.